Combustion 911 Header Background
  SubTotal:      View Cart View Combustion 911 Shopping Cart
Combustion 911 Header Background
 

Combustion 911 Products

Technology for Combustion

Combustion 911 brand combustion components and accessories are engineered to arm you with the latest in controls thinking. Through the years, combustion systems have become more ambitious, and safeties have grown to help protect property and personnel. As the complexity of the myriad systems composing a furnace or oven increases, there’s a greater need for elegant technology that helps operators, maintenance technicians, engineers, and managers cut through the fog. Combustion 911 provides products to do just that.

Pressure Switches

Flame Monitoring

UV sensors are a popular way to monitor burner flame, but many who have used them know that sometimes they need a little help. In systems with multiple burners, where some burners are lit while others are not, it’s common to encounter faults due to a UV sensor “seeing” flame during trial for ignition, because the burner against the opposite wall is firing. Similarly, in situations where a furnace door is open, shop welders, lights, or daylight pouring through windows, can cause an errant "flame on" signal. This is where the Z-Swivel comes in handy. This convenient swivel fitting allows you to dial-in an angle that removes these unwanted UV sources from the sensor's view.

Another issue sometimes encountered with UV sensors is excess heat at the furnace wall. Since sensors are necessarily mounted near the furnace, the only remedy for overheated UV sensors has been the introduction of cooling air, which is not always sufficient. Combustion 911 has another idea. The Z-Scope is a periscope for UV sensors, constructed from stainless steel to discourage heat conduction. The Z-Scope is not an off-the-shelf item, but rather is engineered according to your specific needs.

Z-Scope Z-Scope UV Sensor Periscope
Z-SV-1/2 Z-Swivel UV Sensor Swivel Fitting, 1/2" NPT
Z-SV-3/4 Z-Swivel UV Sensor Swivel Fitting, 3/4" NPT
Z-SV-1 Z-Swivel UV Sensor Swivel Fitting, 1" NPT
 
 

Combustion 911

600 Mogadore Rd. Kent, OH 44240

Phone 330-678-3683

Email: support_ab@combustion911.com

View Terms and Conditions

Privacy Policy

©2024 Olstrad Engineering All Rights Reserved

Visit Combustion 911 on LinkedInVisit Combustion 911 on FacebookVisit Combustion 911 on TwitterWatch Combustion 911 videos on YouTubeEmail Combustion 911Read Articles on the Combustion 911 Blog
Olstrad Engineering ESA Industrial Burners IHEA Member
Elektrogas Valves and Regulators

Need a quote? Have a Question?