Abby Karnes began her Olsträd journey as an automation intern, and has since become an indispensable full-time Mechatronics Engineer. Her career journey has been rooted in learning, discovery, and a constant commitment to problem solving. From Intern to Full-Time Abby’s passion for STEM subjects started early. “Growing up, I loved doing science projects and playing Read More
Combustion 911 Blog
Ratio Regulator FAQ
Categories: Elektrogas, FAQs
Comments Off on Ratio Regulator FAQ
What is a ratio regulator? You might be more familiar with another name. These are sometimes called cross-connected regulators, proportional regulators, or zero governors. Or any mix of those words, like proportional governor. Each of these names can give us an idea of what the device does. When working with combustion, you want a specific Read More
FAQ: Gas Filters
Categories: Elektrogas, FAQs
Comments Off on FAQ: Gas Filters
A gas filter is installed upstream of all other components on an industrial combustion system. It’s a simple item with a big job. What does a gas filter do? A gas filter is commonly provided with a cast aluminum housing, and the filtration is performed by the media inside. Depending on your application and the Read More
Employee Spotlight: Jennifer Williams
Categories: Company Culture
Comments Off on Employee Spotlight: Jennifer Williams
Jennifer Williams recently became the new Vice President of Combustion at Olsträd Engineering! We had the opportunity to ask Jennifer some questions about her time at Olsträd, her new position, and her plans moving forward. Congratulations on your new title! Do you have any plans for the combustion group you can share? My plan and Read More
Elektrogas Proof of Closure FAQ pt 2
Categories: FAQs
Comments Off on Elektrogas Proof of Closure FAQ pt 2
Welcome to round two of our proof of closure FAQ! Q: Do I need “Proof of Closure?” A: Proof of Closure (POC) is required by NFPA86 if the burner capacity is 400K BTU/Hr or more; in these cases, proof of closure is required on one valve in series, while visual indication is required on both. Read More
FAQ: How do you wire devices with metric electrical connections?
Categories: Pressure Switches
Comments Off on FAQ: How do you wire devices with metric electrical connections?
Conduit For many years, the use of rigid or liquid-tight conduit was the standard for running wires to field devices, such as safety shut-off valves, pressure switches, and flame safety devices. Rigid conduit is thin walled metal tubing that helps to protect wires from mechanical damage and some environmental factors. Liquid-tight conduit is flexible and Read More
Elektrogas VMRNA Automatic Vent Valve
Categories: Elektrogas, Industrial Solenoid Valves, Industrial Valves
Comments Off on Elektrogas VMRNA Automatic Vent Valve
The Elektrogas VMRNA is a normally-open vent valve for industrial combustion systems. Because the valve is open when de-energized, VMRNA can be thought of as the opposite of a safety shut-off valve (closed when de-energized). How they work A reverse-acting solenoid valve, VMRNA is normally open. That means you must apply power to close the Read More
New Combustion Pressure Switch Accessories!
Categories: Pressure Switches
Comments Off on New Combustion Pressure Switch Accessories!
We’re excited to announce our all-new accessories for the C911-P combustion pressure switch are in stock and available now! What’s new? The electrical connection for the C911-P is M18x1.5. This might be an unusual size for some of you, so we are now stocking a cable gland that may be purchased separately if needed (pictured Read More
How to: Attach S Actuators to VF Valves
Categories: Elektrogas, How To, Industrial Valves
Comments Off on How to: Attach S Actuators to VF Valves
It’s easy to mate an Elektrogas S actuator with a VF butterfly valve. Here’s how it’s done: Identifying the Parts To begin, let’s gather and identify the necessary parts. S actuators ship with the parts shown above. 1) The solenoid actuator 2) A connection ring3) Two screws4) A cork gasket Butterfly valve VF ships alone. Read More
Custom Control Panels
Categories: Control Panels
Comments Off on Custom Control Panels
Olsträd Engineering offers high quality custom panels for combustion and process control. We have long experience with relay logic, PLC-based solutions utilizing advanced HMI, and automation. Each panel is designed according to your needs, taking into account like spares and the best technology available. Our control panels are cost-effective, simple to operate, and easy to Read More
Combustion 911
600 Mogadore Rd. Kent, OH 44240
Phone 330-678-3683
Email: support_ab@combustion911.com
©2025 Olstrad Engineering All Rights Reserved
Comments Off on Employee Spotlight: Abby Karnes