SubTotal: 
  
Combustion 911
Supplying and Serving the Combustion Industry
an Olsträd Engineering Company

Site Search

Learn More About...

UV Detector UVS 10

UV Detector UVS 10D3

Price:
Quantity:
  • ½″ NPT internal thread and cooling air connection
  • The UV sensor monitors the gas burners in intermittent operation
  • The burners can either be ignited directly or operated as pilot and main burners
  • Suitable for small burners due to high sensitivity
  • Virtually immune to interference due to its insensitivity to daylight, infrared radiation and incandescent bulbs
  • Maximum safety thanks to protection against discontinuity or short-circuit on the flame signal cable
  • Lower logistics costs as the UVS 10 replaces several previous models
  • Suits industrial needs due to robust design
  • Complies with the requirements of EN 298 in conjunction with Elster Kromschroder automatic burner control units
  • UV sensors UVS 1, UVS 6 and UVS 8 can be replaced by using various adapters

Accessories

Model and Description Price Cart
UVS ACC 01
Replacement UV Tube for UVS 1, 6, 10.
UVS ACC 02
Quartz glass disc with seals.
Z-SV-1/2
Zintronix Z-Swivel UV Sensor Swivel Fitting, 1/2" NPT
Z-SV-3/4
Zintronix Z-Swivel UV Sensor Swivel Fitting, 3/4" NPT
Z-SV-1
Zintronix Z-Swivel UV Sensor Swivel Fitting, 1" NPT
Z-Scope
Zintronix Z-Scope UV Sensor Periscope

Applications

Application for UV detectors UVS Features

The UV detector responds to the ultraviolet light of a flame. It does not react to daylight, incandescent lamps, infrared radiation, hot work-pieces or incandescent furnace walls.

The UVS 6 is complete with a quartz lens, which isolates the detector from the hot furnace atmosphere against humidity, dirt and heat.

A quartz lens is not necessary for the UVS 8 detector. Overheating, dirt and condensation can be avoided with cooling as shown in the diagram below.

Max lead length between UV detector and automatic burner control is 150 feet (50 m), if plastic conduit is used. If metallic conduit is used, this length should not exceed 50 feet (15 m).

The maximum recommended sighting distance between the UV detector and the flame is 16″ (400 mm)

Specifications

Materials of construction: Aluminium housing with integrated heat guard, with connection terminals
Distance between UV sensor and flame: 300 – 400 mm.
UV tube: P578, spectral range: 190 – 270 nm
max. sensitivity: 210 nm ± 10 nm
Service life of the UV tube: approx. 10,000 operating hours
Min. DC signal: 1 μA
Enclosure: IP 65
Ambient temperature: -40 to +80°C (-40 to +176°F)
Weight: 280 g (0.6 lbs)
Max. length of cable UV sensor – automatic burner control unit: see instructions for automatic burner control unit

Jump to UVS model page

Model:

Click Here for Help choosing which model you need.
(Click here to Close)

Select Connection Type

  All Products
UVS
Accessories
UVS 10D2
Price:
½″ NPT internal thread. Replaces UVS 8T.
UVS 10D3
Price:
½″ NPT internal thread and cooling air connection.
UVS 10D0G1
Price:
Rp ½″ internal thread and M20 cable gland. Replaces UVS 6.
UVS ACC 01
Price:
Replacement UV Tube for UVS 1, 6, 10.
UVS ACC 02
Price:
Quartz glass disc with seals.
Z-SV-1/2
Price:
Zintronix Z-Swivel UV Sensor Swivel Fitting, 1/2" NPT.
Z-SV-3/4
Price:
Zintronix Z-Swivel UV Sensor Swivel Fitting, 3/4" NPT.
Z-SV-1
Price:
Zintronix Z-Swivel UV Sensor Swivel Fitting, 1" NPT.
Z-Scope
Price:
Zintronix Z-Scope UV Sensor Periscope.

Latest Blog Post

  • Use the ZI-808 From the Internet
    One of the most exciting features of the ZI-808 is its built-in web server. Its user interface is designed like a standard web page and embedded into the instrument. That means that any device that can open a web page can use it. Desktop, laptop, tablet, smart phone, Android, Windows, iOS, Linux, Edge, IE, Chrome, Firefox. read full post
Combustion 911 Blog Blog Home   Combustion 911 RSS Feed RSS feed
Top