Site Search

Learn More About...

Kromschroder Products >> UV Detectors >> UVS > > UVS 10D0G1

UV Detector UVS 10D0G1

Price: Contact Us

This item is not available for order online

Rp ½″ internal thread and M20 cable gland
Replaces UVS 6
The UV sensor monitors the gas burners in intermittent operation
The burners can either be ignited directly or operated as pilot and main burners
Suitable for small burners due to high sensitivity
Virtually immune to interference due to its insensitivity to daylight, infrared radiation and incandescent bulbs
Maximum safety thanks to protection against discontinuity or short-circuit on the flame signal cable
Lower logistics costs as the UVS 10 replaces several previous models
Suits industrial needs due to robust design
Complies with the requirements of EN 298 in conjunction with Elster Kromschroder automatic burner control units
UV sensors UVS 1, UVS 6 and UVS 8 can be replaced by using various adapters

Learn More:
Documentation
Accessories
Applications
Specifications

Documentation

	FAQ: Kromschröder Product Labels and Type Codes (Blog Post)
	UV Detector UVS Brochure
	UV Detector UVS Installation Instructions
	UV Detector UVS Technical Sheet

Accessories

Model and Description	Price	Cart
UVS ACC 01 Replacement UV Tube for UVS 1, 6, 10.	Contact Us	Not available for online purchase.
UVS ACC 02 Quartz glass disc with seals.	Contact Us	Not available for online purchase.
Z-SV-1/2 Z-Swivel UV Sensor Swivel Fitting, 1/2" NPT
Z-SV-3/4 Z-Swivel UV Sensor Swivel Fitting, 3/4" NPT
Z-SV-1 Z-Swivel UV Sensor Swivel Fitting, 1" NPT
Z-Scope Z-Scope UV Sensor Periscope

Applications

Features

The UV detector responds to the ultraviolet light of a flame. It does not react to daylight, incandescent lamps, infrared radiation, hot work-pieces or incandescent furnace walls.

The UVS 6 is complete with a quartz lens, which isolates the detector from the hot furnace atmosphere against humidity, dirt and heat.

A quartz lens is not necessary for the UVS 8 detector. Overheating, dirt and condensation can be avoided with cooling as shown in the diagram below.

Max lead length between UV detector and automatic burner control is 150 feet (50 m), if plastic conduit is used. If metallic conduit is used, this length should not exceed 50 feet (15 m).

The maximum recommended sighting distance between the UV detector and the flame is 16″ (400 mm)

Specifications

Materials of construction:	Aluminium housing with integrated heat guard, with connection terminals
Distance between UV sensor and flame:	300 – 400 mm.
UV tube:	P578, spectral range: 190 – 270 nm max. sensitivity: 210 nm ± 10 nm
Service life of the UV tube:	approx. 10,000 operating hours
Min. DC signal:	1 μA
Enclosure:	IP 65
Ambient temperature:	-40 to +80°C (-40 to +176°F)
Weight:	280 g (0.6 lbs)
Max. length of cable UV sensor – automatic burner control unit:	see instructions for automatic burner control unit